Project Management

Summarized using AI

Mach 2.0 at Scale

Nickolas Means • December 18, 2020 • Online

This video titled "Mach 2.0 at Scale" features Nickolas Means speaking at RubyConf 2020, where he explores the story of the Concorde, the only supersonic passenger aircraft that successfully flew commercially. The talk begins by setting the stage with Chuck Yeager's historic achievement of breaking the sound barrier in 1947, which ignited global interest in developing commercial supersonic transport.

Key points of the presentation include:

- Early experiments with supersonic flight, highlighted by the Bell X-1, which faced significant challenges such as drag and control issues, defining the problems ahead for commercial aircraft.

- Innovations in wing design, particularly the delta wing and slender delta concepts, led to the British and French governments funding the Concorde project.

- The collaboration between British Aircraft Corporation and Sud Aviation culminated in the design strategy named Concorde, symbolizing peace and unity between the two nations.

- The unique design features of Concorde, including its droop nose for better visibility during takeoff and landing, heat management systems, and ability to supercruise efficiently.

- The competitive landscape during the 1960s with America and the Soviet Union also pursuing supersonic airliners, including the disastrous Tupolev Tu-144, which lacked comfort and reliability compared to Concorde.

- Ultimately, Concorde entered commercial service in 1976 but faced constraints due to fuel inefficiency, sonic boom restrictions, and limited market routes, leading to a perception of failure despite its iconic status.

In conclusion, Means emphasizes that while the short-term metrics may portray Concorde as a failure due to cost overruns and limited sales, its long-term legacy, technological achievements, and impact on national pride reflect a different story. The talk encourages reflection on the nature of success and encourages viewers to adopt a broader perspective on achievements, considering longer-term impacts rather than immediate outcomes.

Mach 2.0 at Scale
Nickolas Means • December 18, 2020 • Online

When Chuck Yeager broke the sound barrier for the first time, he set off a race around the world to do the same thing with a plane full of paying passengers. The US, Russia, UK, and France all wanted a piece of the inevitable fortune to be made building aircraft to cross oceans faster than sound itself.

In the end, though, only one design flew passengers in significant numbers, the Anglo-French Concorde. Why? Let’s figure out what allowed the British and French to succeed where others failed. Along the way, we’ll learn a little about compromise and constraints and a lot about success itself.

Nickolas Means
Nickolas Means loves nothing more than a story of engineering triumph (except maybe a story of engineering disaster). When he's not stuck in a Wikipedia loop reading about plane crashes, he spends his days as a Director of Engineering at GitHub. He works remotely from Austin, TX, and spends most of his spare time hanging out with his wife and kids, going for a run, or trying to brew the perfect cup of coffee.

RubyConf 2020

00:00:04.799 Okay, here we are. This is one of our last talks for the day. We only have a couple of things remaining, and you're all in for a treat.
00:00:10.080 Mike has already expressed a sentiment I share, which is that Nick is one of my favorite conference speakers of all time. Nick has an incredible ability for storytelling. He’s able to walk us, as audience members, through a journey. So, you are all in for a treat if you're not familiar with Nick or Nicholas Means.
00:00:21.920 A couple of quick things before we dive into Nick. If you didn't know, there is a head-to-head competition going on—an unannounced competition between the five 'run, walk, roll' participants and the 30-minute exercisers. There are 25 participants who have logged it and 21 30-minuters that have logged it.
00:00:39.120 If you have not yet put in your 30 minutes, or if you've already done a 5K or 30 minutes of exercise and just haven't recorded it in the Airtable form, now's the time! I mean, this is an unofficial competition, but hey, why not? We're so close! The last thing I want to throw out there is your 60-second Ruby story. There is a channel called 'My 60-Second Ruby Story,' and I would love if you took a moment to share what got you into this community.
00:01:07.360 It's an incredibly vibrant, loving, and caring community, and I encourage all of you who have a story—any kind of story—what got you here? What was that inciting blog post, video, or person that brought you into all of this? So, if you would, head on over there and let us know.
00:01:25.040 Okay, well, without further ado, I want to introduce Nick Means and bring him onto the stage. Almost there. There we go. It’s coming! Ah, yes it is! Well, hello Nick, my friend.
00:01:56.719 Hello! I am very excited to introduce you. I really mean it—you're one of my very favorite speakers. I’m excited to share you with the world, Nick. That's what we're going to be doing—sharing you with the world.
00:02:07.920 I'm excited to be here! Before I go on, I have a question for you. If I’ve done two 5Ks and 30 minutes of exercise, should I log it all? I don’t know, I didn’t create the rules; I only created the rules, Nick. Okay, who knows? But you know, why not! Alright, very good, without further ado, the floor is yours, or the stage is yours.
00:02:40.160 Thank you so much for that introduction, Adam. It is such a privilege to be back with my friends in the Ruby community. I had to miss RubyConf and RailsConf last year, and that was such a bummer. So, I am so happy to be back.
00:02:47.040 Some of you may remember seeing a different talk on the schedule from me. I had to make a change at the last minute. Unfortunately, we lost our sweet 17-year-old dog last Friday, and I just didn't have the emotional capacity to finish turning my giant pile of notes into a finished talk.
00:03:03.760 The good news is that I have another talk that I wrote recently that actually touches on a lot of the same themes, so I hope you enjoy it. It’s no secret at this point that I like planes, but today is a special day for me because I get to tell you the story of one of my very favorite planes—Concorde.
00:03:21.200 Now, to tell the story well, I have to start several decades before anyone even started thinking about Concorde. To understand what Concorde achieved, we must begin with understanding supersonic flight, which means starting with the Bell X-1.
00:03:39.519 This plane, piloted by Chuck Yeager and powered by four rocket motors, was the first aircraft to fly faster than the speed of sound in level flight, achieving a speed of Mach 1.06, about 600 miles per hour, on October 14, 1947. Breaking the sound barrier was a huge achievement. Until Yeager did it and returned safely, it was widely believed that doing so would be unsurvivable, and for good reason—many previous attempts to fly close to the speed of sound had proven fatal.
00:05:01.199 Pilots exceeding Mach 0.7, entering the transonic zone, often encountered strange problems with their planes. For example, the controls in the Mitsubishi Zero would freeze due to aerodynamic loads on the wings, while the controls on the Supermarine Spitfire would reverse unpredictably between Mach 0.7 and Mach 0.9. The plane would react contrary to what the pilot commanded it to do.
00:05:23.680 The de Havilland DH.108 Swallow, flown in progressively faster dives in an effort to fly faster than the speed of sound, experienced severe buffeting just above Mach 0.9, causing it to break apart. There’s a reason it came to be called the sound barrier.
00:05:39.280 So, what exactly happens to a plane as it approaches the speed of sound? To understand that, we need to talk about how a wing works in the first place. Bernoulli's principle states that in any fluid, including air, an increase in speed results in a decrease in pressure. Airplane wings are designed to take advantage of this principle.
00:06:10.560 The curve of the top of an airplane wing slightly increases the distance air has to travel to get over the top versus underneath, meaning it has to move faster. According to Bernoulli's principle, faster speed means that the pressure on top of the wing is lower, and that lower pressure is what provides lift.
00:06:37.760 This all changes as the plane approaches the speed of sound. At speeds below Mach 0.7, air flows around the wing smoothly. However, as the air speeds up, it starts to move too fast for the air to flow out of the way before it reaches the leading edge.
00:06:56.560 The air at the leading edge of the wing starts to compress, causing tremendous drag. Once the air has passed the leading edge, it rapidly decompresses, creating a shock wave that disrupts the flow of air over the wing. This makes it difficult for the wing to efficiently generate lift, explaining why it seemed like there was a barrier at Mach 1.
00:07:30.400 The X-1 was able to break Mach 1.0 because it was essentially a flying bullet. Its fuselage was modeled after a .50 caliber machine gun bullet, a shape known to be stable at supersonic speeds. It had short, thin wings that minimized drag but also didn’t generate much lift. The meaningful payload of the X-1 was fuel plus a single pilot.
00:07:56.160 People around the world speculated about our supersonic future, dreaming of flights from New York to London after hearing how fast the Bell X-1 could go. However, we were a long way from making it a reality. The next major breakthrough in flying supersonically was the ferry Delta II, which first flew in 1954 and became the first plane to exceed a thousand miles per hour in level flight.
00:08:24.079 The FD2 introduced the concept of a delta wing, which had a couple of significant benefits. First, on a traditional design, the elevators—control surfaces that govern pitch—are located on the tailplane. Because the delta wing is so elongated, it doesn't need a tailplane; instead, it uses elevons, a combination of elevators and ailerons on the trailing edge of the wing.
00:08:54.239 Secondly, the delta design has a huge advantage in how much surface area it presents to the air it's moving through. Both designs have roughly the same wing surface area, but because the wings are so deeply swept and there’s no tailplane, the delta design has much smaller areas facing forward, reducing drag at supersonic speeds.
00:09:23.360 However, the delta design does have one huge disadvantage—it is incredibly inefficient at subsonic speeds. To generate enough lift to take off and climb, it has to fly at a steep angle of attack, which consumes a lot of fuel. The FT2 demonstrated the superiority of the delta wing for high-speed flight, but the inefficiencies at low speeds meant that a delta-wing airliner would have to carry so much fuel that it wouldn't be able to carry passengers.
00:09:42.159 This advancement was a step in the right direction, but it wasn’t enough. Shortly after, in early 1955, Doctors Dietrich Küchemann and Johanna Weber, working at the Royal Aircraft Establishment, published a series of papers detailing a concept they called the slender delta wing. It was known that any delta wing flying at low speed and a reasonably high angle of attack would create a vortex running along each side of the fuselage.
00:10:18.560 Normally, one aims to reduce vortices and other kinds of turbulent airflow over a wing, but in this case, Küchemann and Weber theorized that these vortices might serve an important function, speeding up airflow over the top of the wing. Following Bernoulli's principle, faster air results in lower pressure, meaning these vortices were generating lift.
00:10:48.399 Küchemann and Weber went a step further—their studies indicated that the more swept the wing was, meaning the smaller the angle between the fuselage and the leading edge, the more pronounced this vortex effect. The longer the wing, the more surface area the vortex had to act on, increasing the lift. This suggested that a slender, long delta wing could generate more lift at low speeds than a standard delta design.
00:11:25.040 To test their theory, they built a prototype. The Handling Page HP 115 served as nothing more than a testbed for the slender delta concept. They only built one, and it served no other purpose, but it worked perfectly. You can see the plane flying at a high angle of attack, with a visible vortex swirling off the trailing edge. Given the extra lift generated by these vortices, the plane was controllable as slow as 70 miles per hour, marking a 300 percent improvement over previous delta wing planes.
00:11:53.920 This discovery was enough for the UK government to fund study contracts for two British aircraft manufacturers to design a slender delta Supersonic Transport (SST). Meanwhile, the French had launched their first successful supersonic plane—the Dassault Super Etendard. Acknowledging the British SST project, the French began pursuing their own SST in earnest.
00:12:33.040 The French government awarded grants to three manufacturers—Nord Aviation, Sud Aviation, and Dassault—to develop SST concepts for design competition. Across the Atlantic, late in 1956, the Americans had just flown the Mach 2-capable Convair B-58, the first supersonic bomber.
00:12:48.960 Though it wasn’t a great design—it was difficult to control and had a narrow flight envelope—it could carry significant loads at twice the speed of sound. American aircraft manufacturers were eager to leverage this expertise in creating a passenger-carrying SST, but the U.S. government just wasn’t interested.
00:13:19.120 Meanwhile, the USSR, focused on the space race, was also venturing into supersonic flight. They had developed a few supersonic fighters in the famous MiG series, including the MiG-21, and by 1958, just after Sputnik's launch, they debuted the Tupolev Tu-144.
00:13:46.880 The Tu-144 wasn’t large, but it was a bomber, contrasting with the MiGs being mere cockpits strapped to engines. This plane had a significant load capacity. The Soviets, aware of the British and French efforts to build a supersonic passenger plane through their extensive espionage network, began their work as well.
00:14:18.320 By the end of the decade in 1959, four nations were in the race to fly passengers faster than the speed of sound: the UK, France, the U.S., and the USSR, all just getting started. The French were the first to tip their hand, announcing their SST prototype at the 1961 Paris Air Show.
00:14:44.960 Designed to carry 75 passengers at Mach 1.2 on mid-range overland routes in Europe, the Super Caravelle had won the competition among French manufacturers. The French announcement at the Paris Air Show prompted key developments in the SST race.
00:15:17.680 First, to not be outdone by the French, the Soviet government announced their SST project, the Tupolev Tu-144, in early 1962. This publicly confirmed to the UK, the U.S., and France that the Soviets were indeed pursuing an SST, sparking interest.
00:15:59.760 Second, despite the lack of funding from the government, NASA had been funding SST research and development in the U.S. via the SCAT prototypes as part of general aeronautical research. The inauguration of John F. Kennedy in 1961 changed the U.S. government's position on SST almost overnight.
00:16:22.080 The U.S. government handed research contracts to four major U.S. aircraft manufacturers to develop the NASA prototypes, with competition entries due three years later, in 1964.
00:16:42.480 Finally, the French announcement provided a solution to a problem the British were eager to solve. Bristol Aircraft had won the UK SST design competition with its Bristol Type 223, intended to seat 90 people and fly at Mach 2.2.
00:17:16.880 However, BOAC (British Overseas Airways Corporation), the predecessor to British Airways, stated that, while they would be happy to buy and operate SSTs if they made economic sense, they wouldn’t cover any development costs. This meant that the British government needed to fund the project if it were to happen.
00:17:57.679 Given the estimated development costs and the associated unknowns, the British government needed a partner to share the risks. The Super Caravelle design the French announced was so similar to the Bristol 223 that they complemented each other perfectly.
00:18:36.639 The French were similarly in a dilemma; they had a great design but couldn’t afford to take on the development risk. Therefore, the transport ministers of both governments instructed BAC and Sud Aviation to collaborate and devise a combined design.
00:19:06.560 A short treaty signed in late 1962 cemented their relationship and named the project Concorde, meaning peace and unity in both English and French. While the Americans were busy with their design competition, things started moving swiftly in Europe.
00:19:41.520 The design for Concorde was finalized, and construction of two prototypes began in February of 1965—one at the Sud Aviation factory in Toulouse and the other at the BAC factory in Filton. The following year, Boeing's entry, the 2707, won the U.S. design competition.
00:20:09.600 The early full-scale mock-up of the design was intended to carry 277 passengers and was designed for Mach 2.7. One of the key components was a swing-wing mechanism, enabling the wings to swing forward for efficiency in low-speed flight and swing back into a delta configuration to minimize drag during supersonic flights.
00:20:46.560 Boeing expected to begin on a prototype in early 1967, aiming for a first flight in 1970. They knew they were behind Concorde but wanted to ensure they delivered a better SST that could carry more passengers and achieve higher speeds.
00:21:12.560 On December 11, 1967, the first Concorde prototype was rolled out of the hangar at Sud Aviation's factory in Toulouse in a ceremony attended by the media and dignitaries from both countries.
00:21:37.680 Now, while the wings are obviously the biggest innovation in the Concorde, let's discuss a few other aspects that make this design so special. First, if you know anything about the Concorde, besides its speed, you probably are familiar with its droop nose.
00:22:04.440 But why was that necessary? It goes back to the wing shape. Despite vortex optimization, the Concorde still had to fly at a significant angle of attack to generate lift while flying slowly, such as during landing.
00:22:42.720 That steep angle would mean the pilots couldn't see the runway due to the nose of the aircraft. So they designed the nose to fold down, revealing the primary windscreen behind it. This double windscreen design also reduced the need for cockpit cooling by preventing some of the kinetic heating from reaching it.
00:23:11.760 However, it wasn't just the windscreen where kinetic heating was a concern; it affected the entire plane. As air compresses, it gets warm. If you've ever filled car tires and noticed the hose getting warm, you might have experienced this phenomenon.
00:23:44.000 Significant friction also occurs against the leading edges during flight, generating heat. When Concorde flies at Mach 2, temperature at the tip of its nose could exceed 240 degrees Fahrenheit, with slightly lower temperatures elsewhere.
00:24:26.160 To cope with this heat, the Concorde designers made specific choices. They deliberately chose a target cruise speed just above Mach 2.0, as exceeding Mach 2.2 would necessitate using exotic metals like titanium, extending development timelines.
00:25:01.120 Mach 2.0 was a very pragmatic choice. Even at Mach 2.0, Concorde would still accumulate a lot of heat. The designers needed to ensure passenger comfort and prevent overheating in systems like hydraulic fluid and oil.
00:25:39.760 They came up with a clever solution: using fuel as a heat sink. Just before burning fuel, heat exchangers in the engine feed tanks took heat from the air conditioning packs, hydraulic system, and oil system, warming the fuel.
00:26:14.080 All this excess heat was vented through the engine exhaust, keeping passengers cool and operating the plane efficiently. Concorde also utilized fuel in an interesting way to maintain trim during flight.
00:26:48.320 Flying supersonically changes the forces exerted on the wings by pressurized air and shockwaves, pushing the wing's center of lift further back as the plane accelerates. This causes the back of the plane to rise and the nose to drop.
00:27:23.440 Normally, one would use elevons to counteract this and apply a slight nose-up force. However, using elevons would generate drag, reducing Concorde's range. Instead, fuel was utilized to counteract this shift.
00:27:56.200 Fuel was gradually pumped from tanks in the front to a tank in the back of the plane. This added ballast counteracted the shift in the wing's center of lift by moving the plane's center of gravity rearward, helping to keep it level without incurring drag or reduced range.
00:28:39.199 However, Concorde's most notable innovation was its ability to super cruise. Most supersonic aircraft developed thus far could only maintain supersonic speeds for a few minutes because they required afterburners to achieve those speeds.
00:29:01.520 The orange glow of afterburners is what comes to mind for many when thinking of jet engines, but most commercial planes do not use this method. An afterburner injects fuel into a jet engine's exhaust stream and ignites it, occurring past the engine.
00:29:40.160 This combustion increases the heat of the exhaust gases, causing them to expand and accelerate through the jet nozzles, creating significant thrust. However, this method is very inefficient, burning a vast amount of fuel.
00:30:19.600 This is why most planes using afterburners can only fly supersonically briefly, as they would rapidly exhaust their fuel. Concorde did utilize afterburners as well, but only for specific phases during takeoff and while breaking the sound barrier.
00:30:52.400 Above Mach 1.5, they turned the afterburners off, and the engine intake ramps performed the work. The doors over the intakes would swing down to reduce the intake opening, creating significant compression.
00:31:24.160 This compression allows the engine to take a large scoop of air, compress it, and then release it as a much faster stream in the back. Concorde was most efficient flying at Mach 2.0, traveling further per gallon of fuel than during any other phase of flight.
00:31:56.240 Supercruise enabled Concorde to have the longest supersonic range of any aircraft built until that time. It could fly from New York to London in three and a half hours, which is about twice as fast as a conventional jetliner—but all these innovations remained theoretical until Concorde could fly.
00:32:25.040 The rollout ceremony celebrated the completion of the first prototype; however, a year’s worth of ground testing was necessary before Concorde's first flight, which was planned for early 1969.
00:32:56.640 As you might have noticed, we haven't focused much on the Soviet effort. The Soviet iron curtain kept their advancements secret until they were ready to reveal them, so it was a big surprise when, on December 31, 1968, news emerged from the Soviet Union of the first flight of the Tupolev Tu-144.
00:33:30.960 To the world's astonishment, they had beaten Concorde into the air—but not by much. Concorde would take to the skies for the first time a few months later, on March 2, 1969. It was a short flight of only about 30 minutes at 10,000 feet and 300 miles per hour.
00:34:06.560 Captain André Turcotte never even raised the landing gear during the flight, keeping things as simple as possible. The plane flew beautifully, with Turcotte declaring afterward that it was even easier to fly than he had anticipated.
00:34:42.080 However, in the U.S., things were not going smoothly. Late in 1968, the American team realized that their Concorde competitor, the 2707, was an unworkable design. They faced insurmountable challenges with the hinge mechanism for the swing wing, essentially leading to a decision to discard it.
00:35:22.080 One Boeing engineer stated that in order to cross the Atlantic, they’d need to choose between the hinge and accommodating passengers, ultimately pivoting to a fixed double delta wing.
00:36:01.680 Despite the shift, they were way behind their competitors, who had already flown their prototypes, and were starting nearly from scratch. The Americans underestimated the Soviets; the Tu-144 would go supersonic for the first time on June 5, 1969, again beating Concorde to another critical milestone.
00:36:34.320 However, Concorde would quickly follow, achieving supersonic speeds on October 1, 1969. In 1971, the U.S. SST project ceased due to Congress eliminating funding, despite Boeing spending more than the entire Concorde program budget, ultimately yielding only a full-size wooden mock-up.
00:37:07.040 Meanwhile, Concorde completed all required tests and trials by 1975, receiving its certificate of airworthiness from European regulators, thus paving the way for commercial service.
00:37:42.080 The first Concorde was handed over to British Airways on January 15, 1976. A week later, coordinated take-offs initiated from London and Paris, marking Concorde's entry into commercial service.
00:38:25.920 The British Airways flight flew from London to Bahrain, and the Air France flight traveled from Paris to Rio de Janeiro. Why those destinations? Because the U.S. Congress, in a largely protectionist move, had banned Concorde from U.S. airspace for six months.
00:39:00.960 Six months later, on May 24, 1976, the ban expired. British Airways and Air France celebrated with synchronized landings at Washington Dulles Airport just ten minutes apart.
00:39:38.080 Interestingly, it was not directed to New York. After the congressional ban expired, the Port Authority of New York and New Jersey banned Concorde based on noise concerns.
00:40:14.160 It wasn't until October 22, 1977, a staggering 17 months later, that the U.S. Supreme Court decided the Port Authority overstepped its authority, allowing Concorde to land at JFK, establishing the iconic London and Paris to New York route.
00:40:59.520 The Tu-144 would eventually enter passenger service on November 1, 1977, nearly two years behind Concorde, but by most accounts, it wasn’t a comfortable experience.
00:41:36.400 Cabin noise measured at 95 decibels—about as loud as a lawnmower when it's running. Passengers seated next to each other could only communicate by yelling.
00:42:06.360 Furthermore, it had an incredibly high failure rate, and Aeroflot operated the craft only due to governmental pressure. During a flight, they would often have four Tu-144s prepared, hoping that one would successfully complete service.
00:42:34.640 The Tu-144 managed only 55 passenger flights before being withdrawn from service. So, what led to Concorde’s success? Why did the Anglo-French consortium deliver a working passenger plane when the Americans and Soviets could not?
00:43:03.120 The answer is straightforward compared to the American effort; the Concorde team made much more pragmatic choices. The Boeing design was far more complicated and required exotic materials due to its higher speed; this overreach ultimately led to the project's cancellation.
00:43:35.680 The Soviet comparison is more intriguing, but the key takeaway is partial understanding. Much of the Tu-144’s design was derived from Concorde, courtesy of the KGB.
00:44:13.520 However, the Soviets applied the concepts incorrectly; while the wing shape appeared similar, the Tu-144 was missing key elements that made Concorde’s wing effective at producing vortices. This dropped its takeoff speed requirement significantly.
00:44:42.800 Interestingly, even though the Tu-144 positioned its engines similarly to Concorde and used some of the same internal technologies, it was unable to supercruise, severely limiting its range.
00:45:12.720 The lesson is to cautiously consider what practices and product decisions your team adopts from others; without deep understanding, the desired results are unlikely.
00:45:39.520 These lessons are crucial, but as I delved deeper into writing this talk, I discovered a more compelling question: was Concorde truly successful? Let’s examine some figures.
00:46:05.200 The estimated development cost for Concorde was £70 million, roughly $168 million at historic exchange rates. However, the actual development cost exceeded £1.134 billion (approximately $2.7 billion) – a staggering 1600% cost overrun.
00:46:36.080 This equates to roughly $20 billion today and was funded by the British and French governments. Let’s consider sales: at its peak, Concorde had over 100 outstanding options—essentially reservations from airlines for delivery slots.
00:47:09.760 British Overseas Airways, Air France, and Pan Am were identified as launch customers, with six Concordes each. Ultimately, though, only 14 Concordes went into service, with seven each for British Airways and Air France.
00:47:45.520 Several factors contributed to this. One was fuel economy; Concorde could fly a passenger 17 miles on a gallon of fuel, while the Boeing 707 achieved 33 passenger miles per gallon.
00:48:18.000 Concorde was about half as efficient but that was an acceptable trade-off for its speed. Then came the Boeing 747-400, which featured new turbofan engines, yielding 73 passenger miles per gallon.
00:48:51.920 Concorde's engines were so inefficient that it could burn two tons of fuel, roughly 2% of its full load, just taxiing out to the runway.
00:49:27.360 Another issue was sonic booms. The shockwave produced by the compression and decomposition of air in front of the plane travels to the ground, creating a sonic boom akin to the way lightning produces thunder.
00:50:03.680 It's not just a single boom while crossing the sound barrier; it creates continuous booms along the flight path. In spring 1964, the FAA conducted an experiment known as Project Bongo over Oklahoma City.
00:50:38.560 For six months, residents endured sonic booms—eight per day starting at 7 AM—and in total, they experienced 1,253 booms during the initial 14 weeks of testing.
00:51:10.640 The FAA received nearly 10,000 complaints, and during testing, 147 windows were broken in the two tallest buildings in Oklahoma City. The conclusion was clear: regular supersonic flight over land was a complete non-starter.
00:51:44.720 This led to the U.S. prohibiting it in 1973, restricting Concorde to over-water routes, with the London to New York route being its only viable option.
00:52:23.280 Given the limited markets, only British Airways and Air France followed through with their Concorde commitments. So, was Concorde a success? With massive cost overruns, poor fuel economy, and minimal sales, one could argue a clear no.
00:52:53.359 But if it was such a failure, why do iconic images of Concorde flying in formation with the Royal Air Force Red Arrows in 1985 exist?
00:53:04.320 This is a 1986 photo of an Air France Concorde leading the Patrouille de France, the French air force demonstration team in the Luffol air show. Or even this 2002 picture of a British Airways Concorde leading the Red Arrows past Westminster Abbey during the Queen's Golden Jubilee.
00:53:38.640 Why is the UK and France so proud of Concorde if it was deemed a failure? Turns out, the answer is quite nuanced.
00:54:11.760 Returning to our earlier question about Concorde's success, let’s examine how we address challenging questions about ourselves—Daniel Kahneman discusses this in his book 'Thinking, Fast and Slow.'
00:54:43.680 Kahneman outlines concepts like the law of least effort, suggesting that we often use minimal energy for tasks, leading our brains to seek shortcuts.
00:55:24.520 One common shortcut is the availability heuristic, a cognitive bias causing us to rely on information that's easiest to recall—often the most recent.
00:55:54.560 This is why, after sharing Concorde’s remarkable story, it merely took six slides to prompt a mental shift declaring Concorde a failure.
00:56:38.320 What happens when we take a moment to reconsider and reflect? One perspective is that the designers at BAC and Sud Aviation were tasked with building a plane capable of carrying 100 passengers across the Atlantic at supersonic speeds.
00:57:17.960 They created a machine meticulously built for that purpose—beautiful, not merely for aesthetics but necessity owing to its speed and distance capabilities.
00:57:54.040 A plane that felt revolutionary, even decades later. Concorde’s designers likely viewed it as a remarkable success.
00:58:26.000 The British and French governments, having invested £1.1 billion, may have felt dismayed by its lack of sales. However, they were not primarily aiming for profit.
00:58:56.440 They were paying for a point of national pride; multiple commentators have referred to Concorde as Europe’s moon landing. It was Europe's major technological triumph.
00:59:29.600 Concorde represented a showcase of aviation capabilities; British and French entry into commercial aviation had suffered from various issues. The governments believed a supersonic transport was vital to regaining status in the market.
01:00:03.200 As time went on, they eventually achieved what they had hoped for: Airbus, a direct descendant of the Anglo-French consortium that created Concorde, became a major commercial player.
01:00:37.360 Today, the Airbus A320 remains the second most produced commercial aircraft line in history, just behind the Boeing 737 and likely to surpass it.
01:01:04.400 Reflecting on Concorde's legacy, did it succeed? By short-term metrics, it could be argued it didn’t; however, when considering the longer-term impacts, it was indeed a success.
01:01:25.680 Looking back on other questions we might have, we often don’t have the same luxury of hindsight.
01:01:37.040 We rarely have clarity in the heat of the moment and often reach critical conclusions that aren't true or fair. We tend to invalidate our entire being based on short-term assessments.
01:02:05.440 So here's my challenge to you: zoom out. Consider the enduring impact you want to make in life, which matters far more than immediate tasks.
01:02:30.320 In life, every relationship nurtured along the way will matter, while the stressors of today are fleeting. Your brain will try to take shortcuts, but if you allow it, you can choose to live intentionally.
01:02:54.040 When you feel overwhelmed by immediate questions, pause. Resist accepting the instant reply because when you take the time to zoom out, your answers will become as evident for you as they were for Concord.
01:03:32.720 Thank you very much! I’ll be hanging out in the Slack room afterward if any of you want to chat. I’d love to talk—thank you for being here.
01:04:00.080 Well, very good Nick. I’m sorry about that. Exceptional! Thank you all so much for joining us. This brings us to the very end of our three days together.
01:04:16.560 With that being said, let us dive over again to the last and final reminder: Don't forget to jump over to the Slack channel where Nick will be available to answer any questions you might have.
01:04:30.720 Enjoy the break, and then we will move into our closing keynote and finalize our three days together. Thank you very much, everybody—it has been my pleasure, and I look forward to seeing you soon!
Explore all talks recorded at RubyConf 2020
+17